2008 Nakamura WT-150MMY CNC Turning Center with Fanuc 18iTB CNC Control
CAPACITY:
Bar Capacity - 2.0" (l/r)
Chuck Size - 6"
Swing Over Bed - 7.5"
Swing Over Saddle Cover - 7.5"
Max. Turning Diameter - 7.5"
Max. Turning Length - 15.7"
Distance Between Spindle Max/Min - 29.5"/7.87"
MAIN SPINDLE:
Drive Motor
Fanuc Main Spindle Motor (Continuous/50" Ed) - 15/20 HP Ac 11/15 kw
Speed Range - 50-5,000 rpm
Constant Output
Constant Torque
Spindle Nose - A2-5
Hole Through Spindle - 63mm (2.48")
Hole Through Draw Tube - 52mm (2.05")
Piston Thrust at 90% Efficiency
SUB SPINDLE:
Drive Motor
Fanuc Spindle Motor (Continuous/50% ED) - 11/15 HP AC 7.5/11 kw
Spindle Speed (Standard/Optional) - 5,000 rpm
Constant Output
Constant Torque
Spindle Nose - A2-5
Hole Through Spindle - 63mm (2.48")
Hole Through Draw Tube - 52mm (2.04")
Front Bearing ID - 90mm (3.54")
Max. Torque at Spindle
C-Axis (CF Control) *For both main and/or sub-spindle
Index Mechanism - Driven by Spindle Motor Through V-Belt
Max. Programmable Angie - +/-99999.999 Degree
Least Input Increment - 0.001 Degree
Rapid Index Speed - 600 min
Cutting Feed Rate - 1-4,800 Degree/min
Positioning Accuracy - 40 Sec
Repeatability - +/-30 Sec
Simultaneously Controlled Axis - 3 Axis (X/Z/C)
C-Axis Clamp - Disk Clamp
Braking Torque - 26 NM
Engage/Disengage Time - 1.5 Sec
SADDLE:
Configuration - 45 Degree
Feed Motor:
X1 Axis - AC 2.0 HP
X2 Axis - AC 2.0 HP
Z1 Axis - AC 2.6 HP
Z2 Axis - AC 2.6 HP
Y1 Axis - Ac 1.6 HP
Effective Slide Travel
X1 Axis - 6.6"
X2 Axis - 6.6"
Z1 Axis - 18.3"
Z2 Axis - 18.3"
Y1 Axis - 1.37"
Rapid Traverse
X1 Axis - 630 in/min
X2 Axis - 630 in/min
Z1 Axis - 1574 in/min
Z2 Axis - 1574 in/min
Y1 Axis - 236 in/min
Cutting Feed
X/Z Axis - 0.0001-500mm/rev
Y Axis - 0.0001-500mm/rev
Jog Feed
All Axis - (16 Steps) 0-1260mm/min
Ball Screw Diameter/Pitch
X1/X2 - 1.25"/.31"
Z1-22 - 1.25"/.47"
Y1-1.25"/.23"
Thrust Force
X1-X2 Axis - 2.T KN
Z1-Z2 Axis - 50. KN
Y1 Axis - TBA
TURRET:
Number of Turret - 2
Turret Head Type Upper/Lower - Dodecagonal Drum Turret
No. of Tool Station Upper/Lower - 12 Stations x 2
Turret Thickness Upper/Lower - 3.15"
Tool Size (Square) Upper/Lower - 25mm x 25mm (1" x 1")
Tool Size (Round) Upper/Lower - 32mm (1 1/4")
Turret Clamping Force Upper/Lower - 4.6 Ton
Turret Index Drive - Servo Motor
Index Time for 1 Station - 0.2 Sec.
1/2 Round - 0.7 Sec.
COOLANT UNIT:
Pump Motor - AC .24HP x 2 Sets
Pump Delivery (50HZ/60Hz) - 13.2/17.7 Gal/min
Tank Capacity - 47.5 Gal
POWER REQUIREMENTS:
Power Supply - AC 200/220 Volts + 10% to -15%
Power Connected - 76.2 KVA
Parts Catcher G - for Sub Spindle - Gripper Type
Automatic Swing - in/out type, with stocker to keep the cut-off parts in or with
outlet chute to transfer the parts away from machine on to the part outlet
conveyor or separate pan.
Capacity - 2" (52mm) Part Dia.
Max Length - 4" (100 mm)
Max Weight - 3.3 lbs. (1.5 kg)
GENERAL:
Machine Dimensions - Length: 112.2"; Width: 76.7"; Height: 70.8"
Spindle Center Height from Floor - 45.2"
Floor Space - 112.2" x 76.7"
With optional right side discharge chip conveyor (length x width)
Weight - 5,500 kg (12,125 lbs.)
Noise Level - Less than 80 Decibels
INCLUDES:
16 Live Holders: (5) MCU 1.5 0-90 Degree, (7) KZ-1513 ER32 Face Mill/Drill Holders
(4) KZ 1510 ER32 Cross Mill/Drill Holders
(1) ATS A5 S-20H Collet Chuck
(2) 6" 3 Jaw Chucks
High Pressure Coolant C, 800 PSI Both Turrets
Chip Conveyor
LNS Quick Load Servo S3 Bar Feeder
PRICE: $POR
E-Mail: bidspec@bidspecialists.com