1999 OKK Model HM-50S Horizontal Machining Center
SPECIFICATIONS:
Pallet Table Dimensions - 19.69" x 19.69"
Minimum Index Curvic Coupling - 1 Degree
Maximum Longitudinal Travel X-Axis - 24.4"
Maximum Vertical Travel Y-Axis - 22.05"
Maximum Table Travel - Z-Axis - 22.05"
Spindle Center to Pallet Surface - 1.18 - 23.23"
Spindle Gage Line to Pallet Center - 3.91 - 27.95"
Maximum Load on Pallet - 992 lbs.
Loadable Workpiece Diameter - 24.4"
Pallet Change Time, Two Station APC - 5 Seconds
Indexable Speed (Per 90 Degrees) - 1.8 Seconds
Spindle Taper - 7/24 #40
Spindle Ranges, Automatic Selection - Electrical 2 Step
Spindle Speeds - 35 - 14,000 RPM
Number of Speed Ranges - 2
Spindle Drive - AC 30/25 HP
Rapid Traverse Rate X, Y, Z Axes - 1,575 IPM
Feed Rate Range - 0.04 - 1,575 IPM
Automatic Tool Changer - 40 Positions
Maximum Tool Diameter, Magazine Full - 3.23"
Adjacent Pots Empty - 5.51"
Maximum Tool Length - 11.81"
Maximum Tool Weight - 26.5 lbs.
Tool to Tool Change Time - 1.3 Sec.
Chip to Chip Time - 4 Sec.
Air Pressure Required - 57-85 PSI
Machine Weight - 23,046 lbs.
Machine Dimensions - 98.82"L x 155.12"W x 114.17"H
Electrics - 200 Volts, 3 PH, 60 CYC 53 KVa
EQUIPPED WITH:
Fanuc 16 I-M Control
Helical Cutting
Rigid Tapping
Chip Conveyor
Coolant Through the Spindle - High Pressure
PRICE: $POR
E-Mail: bidspec@bidspecialists.com