1995 Chevalier 12" x 24" Precision Surface
Grinder W/Programmable Microprocessor Automatic
Incremental Downfeed Control (Pendant
Mounted) Model: FSG1224AD
SPECIFICATIONS:
Table Size: 11-3/4" x 25-3/8"
Max. Grinding Capacity: 12" x 24"
Max. Longitudinal Table Travel, Hydraulic: 25-5/8"
Max. Longitudinal Table Travel, Manual: 27-1/2"
Max. Crossfeed Travel, Automatic: 12"
Max. Crossfeed Travel, Manual: 13-3/4"
Dist. From Spindle Center to Table: 19-3/4"
Variable Table Speed, Hydraulic: 16' to 82' FPM
Automatic Crossfeed Increment: 1/8" to 1-1/4"
Crossfeed Handwheel, Per Graduation: 0.0025"
Per Revolution: 0.25"
Microfeed, Per Revolution: 0.0005"
Per Graduation: 0.00005"
Automatic Incremental Downfeed: 0.00005" to .002"
Auto Downfeed Dial Per Graduation: 0.0005"
Per Revolution: 0.05"
Microfeed: 0.00005"/.0001"
Rapid Traverse Rate: 8" IPM
Spindle Motor: 5 HP
Standard Grinding Wheel: 14" Dia. x 2" W x 5" B
Approximate Weight: 4,850 lbs.
Approximate Dimensions: 98" x 68" x 88"H
EQUIPPED WITH:
Pendant Mounted and Microprocessor controlled automatic
incremental downfeed
of grinding wheelhead: From
0.00005" to 0.002" in Surface or Plunge modes
of operation. Fully automatic
grinding cycle including rapid advance of grinding
Wheelhead, 0 to 7 sparkout passes,
and retraction of wheelhead to a pre-set
distance at the completion of the
cycle.
Hydraulically actuated longitudinal table feed
Electromechanically actuated feed of saddle
Table and saddle guide ways made of special steel rails with
high accuracy steel rollers
Precision needle roller bearings used on the elevating guide
ways
Fine (micro) feeds graduated to .00005" for vertical & cross
feeds
11-3/4" x 23-5/8" Kanetsu Electromagnetic chuck with a
pendant mounted
potentiometer for variable holding
power and a selector switch for automatic
for automatic demagnetization of work
piece
Over-the wheel parallel wheel dresser
External coolant system with paper filter
External hydraulic pump and tank
5 HP 3/60/230-460 Volt Drive Spindle Motor
ORIGINAL PAINT - EXCELLENT CONDITION & APPEARANCE
INSPECT UNDER POWER
PRICE: $19,500.00
E-Mail: bidspec@bidspecialists.com