1994 Bridgeport 16.5" x 40" Romi EZ Path Lathe, w/EZ Path PC Based Control
Model - EZ Path S/N - 002-078348-325
SPECIFICATIONS:
Swing Over Bed - 16.5"
Distance Between Centers - 40"
Swing Over Cross Slide - 8.6"
Spindle Nose - ASA A2-5"
Spindle Bore - 1.97"
Spindle Speeds (24): High Range (12 Speeds) - 67 to 3,000 RPM
Low Range (12 Speeds) - 37.5 to 1,500 RPM
Rapid Travels - 6.3"
Tailstock Quill Travel - 6.3"
Tailstock Quill Diameter - 2"
Tailstock Taper - #4MT
Floor Space Required - 68" x 110"
Approximate Weight - 4,000 lbs.
EQUIPPED WITH:
Bridgeport EX Path CNC Control, 32 Bit Processor with 2
Megabite Hard Drive
Turn Parts manually or Automatically
"Each" 1st Part, Run Remaining parts Automatically
3.5" Floppy Disk Drive & RS 232 Port
Lever Operated 5C Collet Closer
10" 3-Jaw Chuck
Dorian Toolpost with Miscellaneous Holders
8 HP Spindle Motor
Set of Manuals
INSPECT UNDER POWER
PRICE: $14,500.00
E-Mail: bidspec@bidspecialists.com