1983 Moore #G-18 Jig Grinder S/N - G-3249
SPECIFICATIONS:
Table Size - 11" x 24"
Table Travel (Longitudinal) - 18"
Table Travel (Cross) - 11"
Spindle Housing Vertical Travel - 12-5/8"
Spindle Vertical Travel - 3-5/8"
Table Top to Wheel Collet - 2" x 18"
Spindle to Column Ways - 10"
Spindle to Column Below Ways - 13-1/2"
Infinitely Variable Spindle Speeds - 25 to 225 RPM
Infinitely Variable Spindle Feeds - 2 to 120 RPM
Spindle Feed Adjustable From - 0.100" to 3-5/8"
Grinding Wheel Adjustable From - 6,000 to 175,000 RPM
Grinding Capacity (Hole Dia.) - 1/64" to 3-1/2"
With Extension Plate - 13-1/2"
Main Spindle Slide Adjustment - 1-1/2 Deg.
Either Way, 3 Deg. Included Angle
Radial Off-Set of Grinding Spindle:
(A) - From Center to 1-1/8" Off
Center by Rough Adj.
(B) - While Running .0001" Adj. Fro
Distance of .100" Anywhere in the 1-1/8" Range
Approximate Weight - 4,000 lbs.
Approximate Floor Space - 58" LR x 59" FB x 91" H
Minimum Height with Head in Down Position - 86"
MACHINE FEATURES:
Electronic Servo Drive Provides Infinitely Variable Spindle
Speeds ( 25 to 225 RPM)
Hardened, Ground, and Lapped Steel Ways (No Gibs)
Hardened, Ground, and Lapped Nitralloy Lead Screws
Leadscrews & Nuts are fully immersed & Operate in a Bath of
Oil
1/5 HP D.C. Motor (Main Spindle)
EQUIPPED WITH:
Moore Jig Grinding Heads...Choice of 40K or 60K RPM
Presently This Machine has 40K RPM
Head
Machine is Wired for 220 Volts/1 Phase/60 Cycle Electrics
INSPECT UNDER POWER
EXCEPTIONAL CONDITION - ORIGINAL PAINT!
PRICE: $29,500.00
E-Mail: bidspec@bidspecialists.com